Conference Systems

Audio Voting Meeting System Wire & Wireless Conference Room Microphone Camera Conference Equipment System Delegate Unit

ZR-8208M

The front panel of the host is equipped with a 4.3-inch touch display that shows the current date and time, conference mode, number of online wired and wireless microphones, current channel, conference settings, volume settings, unit addressing, wireless unit shutdown, signal strength, system settings, and other information.
Supports simultaneous use of both wired and wireless microphones to accommodate different conference scenarios.
The host is preset with 14 groups of non-interfering channels in different frequency bands to prevent cross-frequency interference from wireless microphones or other wireless devices.
Features 6 conference modes: All Open Mode (wired only), Chairman Only, FIFO (First In First Out), LIFO (Last In First Out), Limited Mode, and Application Mode (wired only).
Number of speakers: The system allows setting 1 to 12 simultaneous speakers for wired microphones and a maximum of 8 for wireless microphones.
Unit addressing: Wired and wireless microphones can be addressed simultaneously, and new microphones can be added midway without re-addressing.
In response to environmental protection initiatives, the host supports one-touch shutdown of wireless microphones to avoid unnecessary waste. When the host is powered off, both wired and wireless microphones shut down accordingly.
Supports viewing the signal strength of currently speaking microphones via the host.
Camera tracking settings can be configured directly through the display of the host.
check-in, voting, and ballot functions can be initiated via the host. After initiation, voting results can be viewed on the host.
Maximum timed speech can be set to 99 minutes; voice-activated mode can be set to a maximum of 3 minutes. The microphone automatically turns off after 3 minutes. This function is only effective for delegate units and does not affect the chairman microphone.
Voice-activated mode features sensitivity settings from levels 1 to 10 and vox disable button for cancelling voice activation. Higher values indicate higher sensitivity.
Priority mode is dedicated to the chairman unit. The chairman priority button can be set so that other units are either muted or turned off when pressed.
Supports dual host backup by backup box. The current device can be set as primary host or backup host in system settings
The host can display the current host version number, display version number, and wireless AP version number. Units also display their version numbers and support firmware upgrades via USB.
Can interface with fire alarms device and supports short-circuit triggering. Upon trigger signal, alarm alerts appear on both the host display and microphone displays.
The front panel of the host is equipped with a USB recording interface. Insert a USB drive and press the record button; the REC indicator light flashes to indicate that recording has started.
4 × RJ45 network ports can connect wired microphones (each port supports 30 units and can be expanded with extender for more units) or connect to a wireless AP to support wireless microphones.
4 × 8-core aviation interfaces can connect wired microphones and can be expanded with extender for more units.
Features one USB-B interface for connection to a PC. The PC software can be used for camera tracking configuration, conference mode settings, speaker number settings, priority mode settings, time synchronization, host connection status retrieval, and other functions.
These can connect cameras for tracking and interface with third-party central control systems to control microphone on/off, conference mode selection, one-touch mute of all microphones, overall volume adjustment, individual microphone volume adjustment, automatic addressing, and other functions.
The system can connect handheld, headset, lavalier, and other microphones without requiring an additional host.
Supports customized AI noise reduction.